steam cooling
英 [stiːm ˈkuːlɪŋ]
美 [stiːm ˈkuːlɪŋ]
网络 蒸汽冷却法; 蒸汽冷却
双语例句
- Effect of the Cool Steam Inlet Condition on Rotor Cooling Efficiency
冷却蒸汽进口条件对转子冷却效果的影响 - Reheat steam cooling section of pipeline;
再热蒸汽冷段管道； - Steam turbine forced cooling safety analysis;
汽轮机；强迫冷却；安全性分析； - Her models show that a large percentage of the water in the molten rock would quickly form a steam atmosphere before cooling and condensing into an ocean.
模拟显示，熔化的岩石中大部分水很快会形成蒸汽，然后冷凝形成海洋。 - The steam cooling method was applied in this paper to study the design and characteristics of cooling structure for a vane of gas turbine.
在某燃气轮机第二级导向叶片的基础上，对叶片内部进行了设计并采用内部蒸汽冷却方式。 - Numerically simulating mist/ steam impingement cooling with phase change
水雾/蒸汽相变冲击冷却的数值模拟 - The evaporator vapor lines are fitted with an entrainment separator. Numerically simulating mist/ steam impingement cooling with phase change
蒸发器的蒸汽线装有雾沫分离器。水雾/蒸汽相变冲击冷却的数值模拟 - On supply services for instrument air, service air, steam, cooling water, raw water, condensate, fire water and gas headers.
在仪表气源，工作气源，蒸汽，冷却水，自来水，凝结水，消防水和气体集管。 - Within the park, a power company, pharmaceuticals firm, wallboard producer and refinery share in the production and use of steam, gas and cooling water.
工业区里有发电厂、制药厂、墙板制造厂和提炼厂，它们共同生产和使用蒸汽、天然气和冷却水。 - A variotherm injection molding technique with steam heating and coolant cooling was studied and its molding process was also designed.
研究了一种利用蒸汽加热和冷却水冷却的变模温注塑工艺，制定了其工艺流程。 - Two reactors, one big steam turbine hall and cooling towers for heat removal.
2个反应堆，1个大蒸汽涡轮，还有除热量的冷却塔。 - Steam-Cooling of Heating Furnace and Its Application
加热炉汽化冷却技术的应用 - Compared with the steam compressing cooling cycle, the characteristics of the air cooling cycle, especially the excellent characteristic for solving environment-protecting and that of broad scope for application temperature, are discussed.
通过与蒸汽压缩制冷循环的比较，论述了空气制冷循环的特性，特别是空气制冷循环对解决环保问题的优良特性以及适用温度范围宽广的特点。 - The liquid-cooled chiller is one of the ground equipment to provide the qualified cooling liquid or thermal liquid for equipment cabin or passenger cabin of aircraft. It adopts steam compressing cooling mode for refrigeration and electric heaters for heating.
液冷系统是向飞机设备舱或座舱提供符合要求的冷液或热液的地面保障设备，其制冷方式为蒸汽压缩式制冷，制热方式为电加热。 - The technical principle, composition and application of the steam fog cooling system are introduced.
介绍了汽雾冷却系统的技术原理、系统构成及实际应用情况。 - Discussion and Practice of Steam Force Cooling Turbine
蒸汽强冷汽轮机的探讨与实践 - Test results show that the defects of the said heat~ exchange tubes are mainly located in the superheated~ steam cooling area as the result of the severe vibration of the heat~ exchange tubes and the intense inter~ baffle friction in this area.
解剖检验结果发现：高压加热器热交换管有缺陷的位置主要集中在过热蒸汽冷却区，原因是过热蒸汽冷却区热交换管剧烈振动、隔板之间发生强烈摩擦引起的。 - Using the exergy analysis method, the conception of energy quality character was presented, which indicated the discretion of electricity, gas, coal, steam and hot water, cooling or heating load etc.
基于热力学第二定律的分析方法，按照能质系数的概念确定了电、天然气、煤、蒸汽、热水等各种形式的建筑用能及建筑物耗冷量、耗热量的能源品位高低； - Scale prevention and low pressure steam cooling for mechanical sealing of metal bellows expansion joints
金属波纹管机械密封结垢处理与低压蒸汽冷却 - Recovery and Make Use of Steam of Heating Furnace Vaporization Cooling System
加热炉汽化冷却蒸汽的回收利用 - The operation of steam feed-water pump of air cooling generating unit and related system design was discussed in this paper.
对空冷机组上的汽动给水泵运行特点和有关系统设计作初步探讨。 - Using freeze condensing vacuum system for edible oil deodorization, can substantially lower consumption of steam, reduce cooling water and so saving energy and reduce environmental impact.
将传统食用油脱臭工艺蒸汽排除方式，由大气冷凝器支持下高压蒸汽喷射泵系统，改换为冻结-冷凝真空脱臭工艺，可大幅降低蒸汽消耗，减少用水量，节约能源，有利于环境保护。 - Through measuring steam turbine condenser cooling flow rate, the precision and mean values measured by ultrasonic flow meter and the method using heat balance are analyzed.
通过汽轮机凝汽器冷却水流量的测量，分析了采用超声波流量计与凝汽器热平衡方法测量冷却水流量的精确度及均值。 - The Measuring Methods of Steam Turbine Condenser Cooling Flow Rate Their Compare
凝汽器冷却水流量测量方法分析及其比较 - According to the different parameters of the steam condenser cooling area and the prevailing wind direction wind speed of the air-cooled unit of each scheme, the summer capacity and economy were analyzed to seek the best cooling schemes for the thermal power plan.
通过对不同的机组参数空冷凝汽器冷却面积和迎风面风速的各方案，进行渡夏能力和经济性综合分析比较，以寻求符合电厂实际的最佳冷却方案。 - In the steam cooling system, by raising the vacuum and improving the cooling water system, the optimal control of condenser is achieved. In part of turbine, scaling prevention, jude and dealt with are highlighted.
在蒸汽冷却系统中，通过提高真空和改造冷却水来实现凝汽器的节能优化控制，在汽轮机部分着眼于汽轮机结垢的预防、判断和处理。 - We design three different forms of evaporator and heat transfer area adjustable heater, complementary with small steam generator, steam condenser, cooling tower, condensed liquid recovery tank, vacuum pump and various kinds of pressure gage.
设计了3种不同形式的蒸发器及换热面积可调节的加热器，辅以小型蒸汽发生器、蒸汽冷凝器、冷却塔、冷凝液回收罐、真空泵和各种仪表、管道，组成本实验单效浓缩设备。 - The overheated steam for cooling lubricants clean, no harm, the source of widespread, is completely green.
而过热水蒸气作冷却润滑剂无污染、无危害、来源广泛，是完全绿色的。 - This objective of this study is to design evaporative condensers for small-scale steam turbine exhaust cooling, and therefore promote the application and provide a reference for thermal power plants in the country.
本文的目标是设计用于小型汽轮机排汽冷却的蒸发式冷凝器，为其在国内火电厂中的应用和推广提供参考。 - By comparing with the previous calculation, it is found that under the same steam flow rates impingement-film cooling can achieve better cooling effect than using film cooling only.
将计算结果与前面的计算结果进行比较发现，在相同的蒸汽流量下，冲击.气膜冷却叶片比单纯的气膜冷却叶片能够达到更好的冷却效果。